Investment-Grade
Energy Audits
Before you spend millions on commercial solar, you must optimize your current load. Our audits identify 15–30% in immediate savings through technical corrections and behavioral shifts.
The "Solar-First" Mistake
Many Kenyan businesses jump straight into purchasing hybrid solar systems based on their monthly KPLC bills. This is a critical error. Bills only tell you how much you used, not how much you wasted.
Installing solar on top of inefficient equipment or a poor Power Factor results in over-sizing the system—wasting capital on extra panels and batteries that you don't actually need. Our audit finds these inefficiencies first, allowing us to design a leaner, higher-ROI solar solution.
Demand Management
Shifting heavy motor starts to peak solar hours or utilizingBESS storageto avoid high KPLC kVA demand charges.
Power Factor Correction
Correcting reactive power to stop paying KPLC penalties for 'lazy' energy use.
What We Uncover:
Ghost Loads
Equipment that consumes power even when 'switched off' or idle.
Thermal Hotspots
Loose electrical connections that waste heat and risk fire.
Phase Imbalance
Uneven loads across phases that destroy 3-phase motors.
Generator Mismatch
Generators running at low load, causing 'wet stacking' and high fuel use.
"An audit is not a cost—it's the highest ROI hour your facility manager will ever spend."
Our Engineering Workflow
We follow standard investment-grade energy auditing protocols to ensure data accuracy.
Site Reconnaissance
Visual inspection of mains panels, roof spaces, and heavy machinery connectivity.
Loggers & Telemetry
Installing high-precision data loggers for 7 days to capture full load cycles.
Technical Analysis
Processing power quality, THD (Total Harmonic Distortion), and peak demand data.
The EIP Blueprint
Delivery of a prioritized Energy Implementation Plan with specific ROI for each fix.
Data-Driven
Facility Intelligence
Our audits are compliant with ISO 50001 energy management standards and meet the reporting requirements for EPRA license renewals for large consumers.
- Savings identified before capital expenditure
- Sizing accuracy for Solar & Battery (BESS)
- Detailed Power Quality diagnostics
- Asset health benchmarking
20%
Average Savings Potential
7 Days
Logger Duration
100%
EPRA Acceptance
0 KES
Initial Audit Cost
Audit Intelligence
Critical answers for facility managers and CEO's.
What is the difference between a Walk-through audit and a Detail audit?
A walk-through is a 2-hour visual inspection for obvious wastage. A detailed audit involves 7-14 days of data logging using industrial analyzers to capture hidden transients and load shifts. Our free audit is a standard technical site health check.
How much can we actually save from an audit without buying solar?
Most Kenyan industrial sites can save 5-10% through Power Factor Correction alone. Another 10% often comes from optimizing motor start sequences and lighting retrofits. Solar is the third step in optimization.
Is an energy audit required by law in Kenya?
Yes. Under the Energy Management Regulations (2012), facilities consuming over 180,001 kWh annually are required to conduct an energy audit every 3 years and submit an implementation report to EPRA.
Do you provide the implementation, or just the report?
We are an end-to-end engineering firm. We provide the report, and we also offer the installation services to rectify the issues found, ensuring the projected savings are actually achieved.
Book Your Zero-Cost Audit
Our engineering schedule fills up fast. Reserve your slot today.